Germinate Marijuana Seeds

The importance of germinating seeds is high. If seeds become to wet or too dry you can toss them away. So please, in order to germinate your marijuana seeds follow the instructions. The basics that you need are as follow:

• Two plates
• paper
• Neutral water
• a mixture 40% sand and 60% soil
• Pots for the planets
• A fluorescent tube

Place the seed between some dampened pieces of paper towel. It's highly recommended to use distilled water to germinate your marijuana seeds.

Afterwards, place the marijuana seed (in the towels) between 2 plates and put it somewhere warm. The best temperature to germ your seeds is between 21 and 25 degrees.

Open the plate's only once a day just to have a look. Take note of a tiny white root tip starting to emerge from the marijuana seed. Some marijuana seeds will sprout in a day, while others need a week before they crack open.

Ensure that the towel will not dry out. Put a little bit of water over it every three days.

Once the root has come out of the marijuana seed, you have to put the marijuana seeds in a small pot filled with soil.

Make a little hole in the soil. Holes with half an inch deep are suffice. Plant the marijuana seed with its root facing the hole. Cover the hole with some soil and give it a little bit of water. Make sure the marijuana seeds are still covered with soil after you water them.

Place the pots with the marijuana seeds under a fluorescent lamp and give it a little bit of water every day.

Turn the lights on for about a few hours a day. After 3 to 7 day's, you will see the first few signs of the marijuana plant. The lamp should be at least an inch above the topmost portion of the young marijuana plant in order to avoid burning its leaves.

After 3 to 4 weeks, the marijuana plant should be about 4 inches high and thus big enough to be transferred to a bigger pot. If the temperature allows it, you can now put them outside or place them in your indoor growing room.

How To Make Cannabutter.

Making Marijuana Butter Video At Bottom of Page!

LEARN A QUICKER WAY TO MAKE CANNABUTTER

Pot butter ingredients:

5 sticksof unsalted butter, 2 oz.or more marijuana leaf, 14 grams of buds.
1/2 cupof water.

Tools to make weed butter:

Large pot for boiling, large bowl,
small bowl, strainer,grinder, cheesecloth
or simply an old pair of pantyhose.


1.Prepare marijuana leaf or bud. You can crush or grind your marijuana leaves using a clean electric coffee grinder for ease, or you can do it by hand with a bud grinder or with your hand. The more the leaf and bud is ground the easier it is for THC extraction.
2. Grabyour large pot and add the 3 sticks of unsalted stick butter. Heat on very low stirring occasionally until melted. Don't get stoned and burn it!

3. Once the butter is melted, add your marijuana leaf or bud, and water to the pot. Mix and bring to a slight simmer with the heat still on low and cover.
4.The hardest step in making marijuana butter is that you must wait! The longer you wait with this recipe the better the bud budder.


Let your weed butter mixture simmer for no less than two hours, and no more than 24. Yes patience! If the mixture looks like it could use some more water during the wait time feel free to add a little bit more.

5.After you can't wait any longer, remove the bud butter from heat and let it cool until manageable (about five or ten min). Now pour your fresh marijuana butter through the strainer into your large bowl, this removes the big pieces of marijuana leaf.
6.More extraction for a nice buttery consistency. If you have a cheesecloth handy this step is easy. If your butter is still hot wear rubber gloves. If you do not want to burn yourself. Soak the cheesecloth in the budder, and squeeze into your small bowl used for storage. You can repeat this process to remove more of the marijuana remnants if you feel it is necessary.
If you do not have a cheesecloth then we would recommend using an old pair of pantyhose. Cut the foot off the pantyhose and carefully pour your marijuana butter mixture in and squeeze over your small bowl.
7. Cover your bowl and place it into the refrigerator to cool. The remaining water will separate from the butter. Once cooled you can easily pour off the excess water, and enjoy your fresh marijuana butter.
Now that you know how to make cannabutteryou should try it in one of your favorite recipes that requires butter, like brownies, cake, or cookies.

Medical Marijuana Week Feb. 12th – Feb. 18th

February 12 through February 18 is Medical Marijuana Week, a time to celebrate the progress we have made across the country and our right to safe access to medicine! Our community is under an unprecedented attack by the Obama Administration right now! So this year, Medical Marijuana week is not only a time for celebration, but a time to take action!

Americans for Safe Access has created a week of actions you can take to ensure safe access in your community and nationwide. Check out our Medical Marijuana Week Action Page. Share this page with your friends, and encourage your fellow community members to take action. Print our Medical Marijuana Week of Activism Flyer, post, and distribute the flyer for all to participate in the actions listed below.

Some medical cannabis patients’ cooperatives and collectives are offering generous gifts to members who participate in Medical Marijuana Week actions. Scroll down to the bottom of this message to see which patients’ associations are participating in your community.

MONDAY FEBRUARY 13
NATIONAL: Call the White House and tell Pres. Obama to keep his promise to not use Justice Department resources to undermine state laws, stop putting politics before science, and act immediately to reclassify cannabis as medicine.
TUESDAY, FEBRUARY 14:
NATIONAL: Contact Congress and urge your representative to sponsor HR1983, legislation that reclassify cannabis, end federal interference in state programs, and provide licensed patients and providers a defense in court.
SANTA ROSA, 1:30p: Join medical cannabis community members to support Michael Steffan’s in Court Room 4 in Sonoma County Courthouse, 600 Administration Drive, Santa Rosa.
WEDNESDAY, FEBRUARY 15:
NATIONAL: Ask Governor Jerry Brown to sign the DEA Rescheduling Petition.

CALIFORNIA, 5:00p: Telephone Town Hall regarding the Medical Marijuana Control, Tax and Regulate Act, to dial in call 832 431 3335, enter participant code 1618568.

SAN FRANCISCO, 6:30pm: Candle Light Vigil at the San Francisco Federal Building, 90 7th Street, San Francisco, CA.
SACRAMENTO, 7:00pm: Candle Light Vigil at the Sacramento Federal Building, 501 1st Street, Downtown Sacramento, CA.
SANTA ROSA, 4:20p: Medical Cannabis Movie Marathon at Arlene Francis Center, 99 West 6th Street, Santa Rosa.

THURSDAY, FEBRUARY 16:

NATIONAL: Make your voice heard at a rally near you! Click here to find rally locations.
*On Friday, February 10, at 7pm, San Francisco ASA will be making signs for the Obama demonstration at 847 Howard Street, San Francisco, CA.

FRIDAY, FEBRUARY 17:

NATIONAL: Join the movement and help fund the fight for safe access. Find out how by clicking here.

SAN FRANCISCO, 7:00pm: Movie Night, 847 Howard Street, San Francisco, CA.
SATURDAY FEBRUARY 18:
LOS ANGELES, 1:00pm: join LA ASA for the LA ASA Chapter Meeting from 1-3 at West Hollywood Gateway Mall, 7100 Santa Monica Blvd., West Hollywood, CA 90046.
SPECIAL GIFT FOR ASA MEMBERS:
During medical marijuana week visit any of the following locations and receive a free gift when you participate in the National Action:
SACRAMENTO: Abatin Wellness Center, 2100 29th Street, Sacramento, CA 95818
SONOMA COUNTY : Peace and Medicine 6771 Sebastopol Ave Sebastopol, CA 95472
SAN FRANCISCO: SPARC, 1256 Mission Street San Francisco, CA 94103
BERKELEY: Cannabis Buyers Cooperative of Berkeley, 3039 Shattuck Ave., Berkeley, CA 94705

WEST HOLLYWOOD: Los Angeles Patients & Caregivers Group, 7213 Santa Monica Blvd., West Hollywood, CA 90046
Commit to participating in ASA’s National Week of Action by giving one minute each day next week February 13 through February 18, to stand up for safe access, and attend a rally near you on February 16. Ensure our voice is heard! Take action for safe access!

Activism is continuous in this age of instant communication and it’s important to keep reminding your elected officials that you are out there and that you have a voice and a vote.

If you care about medical marijuana access, spread the word.

- Joe Klare

DA: 40 guns, 2,700 marijuana plants seized during raids

DA: 40 guns, 2,700 marijuana plants seized during raids

How To Make Canna Oil

Items Needed: 1/2 oz of quality bud/trim, ground fine not powdered. 1/2 oz Carbolized marijuana aka vaporizer duff (optional) 1 Cup of cooking oil You can chop your medical marijuana, leave it as is or grind to a coarse consistency. Heat the cooking oil to 280 degrees in a double boiler. You can use a candy thermometer to make sure you don't let the oil get over 280 degrees.

Place your medical marijuana in a double boiler and simmer for an hour or two. Stir frequently to keep your oil and cannabinoids from burning. Keep the temperature below 280 degrees. Filter through a small stainless steel strainer or coffee filter. Save your filtered cannaoil in a jar. Cannaoil lasts much longer than cannabutter because cannabutter is made from a dairy product.

You can also use cannaoil in many recipes where oil is called for instead of butter. Be careful not to burn the oil and never bring the temperature beyond 280 degrees even when cooking. Cannaoil can be used in salad dressing recipes and can be made with olive oil. If you don't have a double boiler or a candy thermometer or just don't want to take a chance on burning cannabinoids off then you may want to use a crock pot. Heat the oil in a crock pot set on low. Once the oil is hot add your medical marijuana. You can also and other herbs like basil or thyme. Cover with a lid and stir frequently to avoid burning. Cook mix for up to 6 hours for best results. Strain the oil through two layers of cheese cloth into your container squeezing the oil through the cloth. Repeat one or two more times to make sure most if not all of the plant material is gone. Store the cannaoil in an airtight glass canning jar etc. Keep your oil in the refrigerator or in a cool place away from sunlight.

How To Make Cannabutter

	Cannabutter Items Needed: 1 cup unsalted butter 1 cup quality medical marijuana trim/bud 2 cups water 2 sauce pans Cheesecloth Bring the water to a boil in a stainless steel sauce pan, then add the unsalted butter. Turn the boil down to a simmer and add the medical marijuana. Simmer the mixture for three to four hours and add more hot water when needed. Make sure not to let the water get to low and the amount of water isn't extremely important. If you use a large sauce pan just use more water.
Some people boil their cannabutter for less than three hours but we find that we get better results when we boil for at least three hours. What happens is that the butter being an oil absorbs THC from the resin glands on the medical marijuana. Other cannabinoids also accumulate in the butter. If you have a vaporizer you can even add your "carbolized" or used medical marijuana to the mix. This may help with those who have neurological problems or need strong pain medicine. After the mix simmers for at least three hours place cheesecloth over a large bowl and pour the mix through the cheesecloth. Have somebody hold the cheesecloth tight or use a large rubber band to hold it on the bowl. This will separate the trim from the butter. It's good to run some pure hot water through the cheesecloth to remove any butter that may be caught up in the cloth. You can simmer a pan of water on the side just before you filter off the marijuana from the butter.
Remove the cheese cloth and put the bowl of cannabutter mix in your refrigerator or freezer to cool down faster. (If you use your freezer be careful not to let the water freeze.) The cannabutter will separate from the water and float on the top of the water. When the cannabutter cools down it will harden. Don't heat medical marijuana beyond 300 degrees when making butters or oils because it degrades the THC which weakens it's strength. Once the cannabutter hardens it will cover the top of the bowl. Now you simply poke a hole on the side of the cannabutter and slowly drain off the water that's below the cannabutter. Cannabutter will last about 1 week in the refrigerator. You can freeze it and get a month or more out if it that way. You can also use this same method to make canna oil by using olive oil and other cooking oils. Use your cannabutter in any recipe that calls for butter. You can also cut it with regular butter if it is too strong etc.

How To Re-veg A Marijuana Plant

First of all re-veg means to re-vegetate in grower slang. Re-vegetating is when you take a plant that's in flower and force it back into vegetative state. Vegetative state is the state or mode a plant is in when it is NOT flowering. The main reason to re-vegetate is to make a mother plant. It's nice to keep a mother plant in veg state, that way when you want to make new plants you just take cuttings from her and root them. Sometimes a good plant sneaks up on you and you may decide you want to preserve her and re-vegging is one option. There is a trick to re-vegging a marijuana plant though. You need to keep enough shade/sucker leaves on the plant to allow it to draw water up and transpire.
If you don't keep enough shade leaves on your marijuana plant it can drown easily. Keep the lower "popcorn" buds on so you have some sites for re-vegetation to take place. When you water be extremely careful not to give your plant much more water than the plant is going to use in a day. Don't soak the pot. Feed your plant light doses of grow nutrients. I also like to use a product called Greenfuse Grow, it helps accelerate plant growth. I don't use as much as the manufacturer suggests most of the time. Definitely don't give the plant a heavy dose of this in the beginning stages of re-vegging. You also need to keep enough bud sites going because that's where you are going to see the plant begin to re-veg. Without any bud sites, the plant can't produce new vegetative growth. So cut your plant back similar to the picture above. This way you can harvest over 95% of the medicine and have plenty bud sites to get some good re-veg action.
Make sure to leave as many of those sucker leaves on as possible. Put your plant into your veg room and give it 18 -20 hours of light. There is no need to give the plant straight 24 hours of light unless you are using florescent lighting. I don't recommend using florescent lights to re-veg with but it has been done. It will take about 1-2 weeks before you begin to see new growth shooting from the buds If you use a simple 400 watt metal halide HID light. Keep on watering LIGHTLY until the plant becomes bushy again and starts using more water. Once the plant begins to re-veg start giving it more grow nutrients. After 4 or 5 weeks you should have a plant that has fully transformed from a mature flowering plant to a mature plant in vegetative mode. In a couple more weeks you should be ready to start taking cuttings. Remember to keep your mother plant in 18-20 hours of light and to give it at least 4 hours rest every night. Some growers believe that a marijuana plant becomes more potent as it ages. After it reaches about 1 year it maxes out in potency

How To Dry And Cure Marijuana

After you have properly trimmed your medical marijuana you will want to give it a proper dry and cure. The process of drying and curing marijuana can and will effect the quality of the final product. The best dry is usually a slow dry. Drying too fast will lock in chlorophyll, nutrient residuals and other things that a slow dry helps remove. You also want a fairly cool and well ventilated room, 60 - 70 degrees is about ideal. A good fan to remove gas build up in the dry area will also help improve flavor and prevent mold. As marijuana and other plant life decomposes and breaks down it produces carbon dioxide gas. It can smell like a bail of straw or alphalpha and it can make your final product taste and smell funny. Proper ventilation will eliminate this problem. To get a nice slow dry you will need to control the humidity. Depending on the time of year you may need a humidifier or a de-humidifier. If it's cool and rainy or too warm you may even need something to control the temperature. Once you get the climate control tuned in you need to put up lines to hang your buds on. Some people hang the entire plant upside down because they believe the THC will flow from the roots into the buds. That is one of the many myths about growing marijuana. THC does not flow in the marijuana plant. The roots have such a minimal amount of THC that even if it did flow it would be useless anyway.

THC forms in the trichomes on the mature flowers of the marijuana plant. That's where the good stuff is for most patients. This is what hash, hash oil and hemp oil is made from. It forms on the flowers and stays on the flowers until it's removed by humans or decomposes into the ground etc. Hanging your plants upside down with the roots on also tends to get dirt on your marijuana flowers. Nobody likes dirty marijuana. Many people use fishing line or other similar string and run it from one side of the area to the other and back again. Leave enough space between lines to get decent ventilation. Once you have your dry room or area set up you are ready to trim and hang your marijuana. Space the trimmed flowers out so they aren't touching each other across the lines. Set up a fan to keep the air in the room properly circulated. Make sure to sweep the floor and clean the entire room well before you hang your marijuana. Dirt particles can easily stick to the sticky trichomes on marijuana buds. Once you have everything trimmed and hung shoot for a humidity of about 40% if you can. 50 is acceptable but much higher than that the first day or 2 can promote mold inside the denser marijuana buds. The denser the buds are the longer you want to keep the humidity around 40%. Indica and Indica dominate strains that have very tight dense flowers are usually more prone to inner bud mold while hanging. Once your medical marijuana flowers begin to feel a little dry and slightly crispy on the outside let the humidity come up to 50 - 55%. Keep the room ventilated and the air circulated at all stages so far.

You want to keep the buds in this stage for at least a week, 2 if possible. Some strains require more than 2 weeks. The longer growing strains often have more nutrient residuals to release and do better with a longer cure time. By drying like this you are really getting a "pre cure" on your medical marijuana. Once you have given the marijuana a proper dry time bring the room down to 50% humidity for 4 hours or so. It's best to do this on a dry day unless you have a dehumidifier. Once the marijuana stems snap but not a crispy snap it's usually ready to jar up. The flowers should still have a little moisture in them but not a lot. It should be about as dry as you like to get it when you like to smoke it but just a tad moister. Open the jars every day for a minute or so until the buds are the perfect moisture. After a week or 2 they are usually cured and ready to smoke. After 3 weeks in the jar they are usually premo. Keeping your medical marijuana in a glass jar helps preserve quality and flavor. This is the quickest and most effective way I have found to dry and cure marijuana and get a high quality product.

After you have properly trimmed your medical marijuana you will want to give it a proper dry and cure. The process of drying and curing marijuana can and will effect the quality of the final product. The best dry is usually a slow dry. Drying too fast will lock in chlorophyll, nutrient residuals and other things that a slow dry helps remove. You also want a fairly cool and well ventilated room, 60 - 70 degrees is about ideal. A good fan to remove gas build up in the dry area will also help improve flavor and prevent mold. As marijuana and other plant life decomposes and breaks down it produces carbon dioxide gas. It can smell like a bail of straw or alphalpha and it can make your final product taste and smell funny. Proper ventilation will eliminate this problem. To get a nice slow dry you will need to control the humidity. Depending on the time of year you may need a humidifier or a de-humidifier. If it's cool and rainy or too warm you may even need something to control the temperature. Once you get the climate control tuned in you need to put up lines to hang your buds on. Some people hang the entire plant upside down because they believe the THC will flow from the roots into the buds. That is one of the many myths about growing marijuana. THC does not flow in the marijuana plant. The roots have such a minimal amount of THC that even if it did flow it would be useless anyway.

THC forms in the trichomes on the mature flowers of the marijuana plant. That's where the good stuff is for most patients. This is what hash, hash oil and hemp oil is made from. It forms on the flowers and stays on the flowers until it's removed by humans or decomposes into the ground etc. Hanging your plants upside down with the roots on also tends to get dirt on your marijuana flowers. Nobody likes dirty marijuana. Many people use fishing line or other similar string and run it from one side of the area to the other and back again. Leave enough space between lines to get decent ventilation. Once you have your dry room or area set up you are ready to trim and hang your marijuana. Space the trimmed flowers out so they aren't touching each other across the lines. Set up a fan to keep the air in the room properly circulated. Make sure to sweep the floor and clean the entire room well before you hang your marijuana. Dirt particles can easily stick to the sticky trichomes on marijuana buds. Once you have everything trimmed and hung shoot for a humidity of about 40% if you can. 50 is acceptable but much higher than that the first day or 2 can promote mold inside the denser marijuana buds. The denser the buds are the longer you want to keep the humidity around 40%. Indica and Indica dominate strains that have very tight dense flowers are usually more prone to inner bud mold while hanging. Once your medical marijuana flowers begin to feel a little dry and slightly crispy on the outside let the humidity come up to 50 - 55%. Keep the room ventilated and the air circulated at all stages so far.

You want to keep the buds in this stage for at least a week, 2 if possible. Some strains require more than 2 weeks. The longer growing strains often have more nutrient residuals to release and do better with a longer cure time. By drying like this you are really getting a "pre cure" on your medical marijuana. Once you have given the marijuana a proper dry time bring the room down to 50% humidity for 4 hours or so. It's best to do this on a dry day unless you have a dehumidifier. Once the marijuana stems snap but not a crispy snap it's usually ready to jar up. The flowers should still have a little moisture in them but not a lot. It should be about as dry as you like to get it when you like to smoke it but just a tad moister. Open the jars every day for a minute or so until the buds are the perfect moisture. After a week or 2 they are usually cured and ready to smoke. After 3 weeks in the jar they are usually premo. Keeping your medical marijuana in a glass jar helps preserve quality and flavor. This is the quickest and most effective way I have found to dry and cure marijuana and get a high quality product.

After you have properly trimmed your medical marijuana you will want to give it a proper dry and cure. The process of drying and curing marijuana can and will effect the quality of the final product. The best dry is usually a slow dry. Drying too fast will lock in chlorophyll, nutrient residuals and other things that a slow dry helps remove. You also want a fairly cool and well ventilated room, 60 - 70 degrees is about ideal. A good fan to remove gas build up in the dry area will also help improve flavor and prevent mold. As marijuana and other plant life decomposes and breaks down it produces carbon dioxide gas. It can smell like a bail of straw or alphalpha and it can make your final product taste and smell funny. Proper ventilation will eliminate this problem. To get a nice slow dry you will need to control the humidity. Depending on the time of year you may need a humidifier or a de-humidifier. If it's cool and rainy or too warm you may even need something to control the temperature. Once you get the climate control tuned in you need to put up lines to hang your buds on. Some people hang the entire plant upside down because they believe the THC will flow from the roots into the buds. That is one of the many myths about growing marijuana. THC does not flow in the marijuana plant. The roots have such a minimal amount of THC that even if it did flow it would be useless anyway.

THC forms in the trichomes on the mature flowers of the marijuana plant. That's where the good stuff is for most patients. This is what hash, hash oil and hemp oil is made from. It forms on the flowers and stays on the flowers until it's removed by humans or decomposes into the ground etc. Hanging your plants upside down with the roots on also tends to get dirt on your marijuana flowers. Nobody likes dirty marijuana. Many people use fishing line or other similar string and run it from one side of the area to the other and back again. Leave enough space between lines to get decent ventilation. Once you have your dry room or area set up you are ready to trim and hang your marijuana. Space the trimmed flowers out so they aren't touching each other across the lines. Set up a fan to keep the air in the room properly circulated. Make sure to sweep the floor and clean the entire room well before you hang your marijuana. Dirt particles can easily stick to the sticky trichomes on marijuana buds. Once you have everything trimmed and hung shoot for a humidity of about 40% if you can. 50 is acceptable but much higher than that the first day or 2 can promote mold inside the denser marijuana buds. The denser the buds are the longer you want to keep the humidity around 40%. Indica and Indica dominate strains that have very tight dense flowers are usually more prone to inner bud mold while hanging. Once your medical marijuana flowers begin to feel a little dry and slightly crispy on the outside let the humidity come up to 50 - 55%. Keep the room ventilated and the air circulated at all stages so far.

You want to keep the buds in this stage for at least a week, 2 if possible. Some strains require more than 2 weeks. The longer growing strains often have more nutrient residuals to release and do better with a longer cure time. By drying like this you are really getting a "pre cure" on your medical marijuana. Once you have given the marijuana a proper dry time bring the room down to 50% humidity for 4 hours or so. It's best to do this on a dry day unless you have a dehumidifier. Once the marijuana stems snap but not a crispy snap it's usually ready to jar up. The flowers should still have a little moisture in them but not a lot. It should be about as dry as you like to get it when you like to smoke it but just a tad moister. Open the jars every day for a minute or so until the buds are the perfect moisture. After a week or 2 they are usually cured and ready to smoke. After 3 weeks in the jar they are usually premo. Keeping your medical marijuana in a glass jar helps preserve quality and flavor. This is the quickest and most effective way I have found to dry and cure marijuana and get a high quality product.

This is why I do it.

 I like your Ideals and Providing the Right Strain for the Right Ailghment, Im a Vet Who Suffers From Injuries and PTSD. I have been a Patient and Advocate since it was Legal, I have knowledge on strains, geneology, Trait Growth, Crop Management, Perpetualk grows and Various Other Knowledge Of the Subject, Right Now Im Struggling With the Feds Shutting Our Dispensaries That a 100% Legit For No Reason Other to say they Can! So If you need Advice, Tips, Knowledge or Simply Just BS about the Subject Please Dont Hesitate to Ask! Thanks again For Reading this. Yes I was on 15 different pills and 325 pound now 0 Pills and Just cannabis and 190 Pounds! Yes MJ has Saved My Life!
Manning Ri (Djweedkill)

Free Cannabis Cup Winners Seeds

November Promotion Attitude Seed Bank promotion is massive, if any of our customers spend over $35 between 9am, 4th Nov and 4pm, 7th Nov (GMT) they will receive, for free, 1x feminised Pineapple Chunk from Barney's Farm, 1x feminised Super lemon Haze by Green House seeds and 2x regular LA confidential from DNA genetics. 4 free seeds, just for spending with us.

These aren't just any seeds from any suppliers; these are Cannabis Cup winners - the world's best strains. As you can tell this is going to be huge

http://www.cannabis-seeds-bank.co.uk/affiliates/jrox.php?id=999&jxUR

http://www.youtube.com/watch?v=4XgDqSy2NRo&feature=player_embedded